top of page
Hardware insertion
Application of threaded inserts with MA thread.
3D design and production of custom hardware in different materials.
Insertion: Metric Threads and Sockets
Metric screw-in inserts
The inserts with metric thread are anchored to the aluminum skins through a mechanical deformation system of the insert itself. This screwing system is particularly solid and reversible, because the screws can be screwed and unscrewed multiple times.
Steel inserts . Inserts with round head, cylindrical or semi-hexagonal head, inserts with flat, countersunk or reduced head.
Pitch: M1,0(11), M1,2 (2), M2 (15), M2,5 (33) , M3 (17), M3 (108), M3,5 (36), M4 (107), M5 (82), M6 (44), M8 (32).
Self-tapping nylon sockets
This screwing system is particularly simple to use: once the panel has been drilled, simply dry-insert the nylon insert, which will ensure the tightness of the screwed-in bit by expansion.
Nylon inserts. An aluminum alloy nut in a tapered nylon cage.
Insertion: Hinges, hangers and sliders
Hinges with cup
The hinge with cup can be applied without the need to provide any perimeter frame. The screwing is done with metric inserts or with self-tapping screws; the cup outlet is milled directly into the honeycomb.
Concealed hinges
The concealed hinge for its application requires the preparation of a perimeter frame that allows the necessary recess milling. Screwing can be performed with either lag screws or metric screws, after inserting appropriate sockets.
Trolleys
The sliding door trolleys can be applied with the screwing systems already described and do not require perimeter frames.
Hangers
The boiserie hangers can be screwed in using the same technique as the previous hardware elements.
Custom hardware
Below are some examples of hardware designed and made to measure to complete specific products
Anodized aluminum pin
Fully aluminum pin, designed by our 3D engineering department.
Made for the positioning and rotation of our ALUXAPP panels to complete a product composed of several parts.
Steel swivel joint
Component engineering. 3D design knuckle joint.
Hardware made for positioning and fixing ALUXAPP panels with variable gradation.
Giunzione su misura
1/1
Pivot made to order by rotating panels on the structure.
Joint made to order for panel rotation.
bottom of page